Contour Eagle TWO Level Access Alcove SHWR Tray No TRUESEAL2 - Choice of Size

AKW / Contour Eagle TWO bath replacement cut to length shower tray for level access. Unhanded. Front entry alcove tray. Suitable for timber or solid floors. For tiled floor finishes. McAlpine gravity or pumped waste options. 26mm thick. Manufactured in the UK from Glass fibre-reinforced plastic (GRP). Max load: 270kg. Choice of sizes 1850x745m and 1850x845mm, each can be reduced in size to 1500mm. End plate supplied for the cut edge.

The Contour Eagle TWO is the perfect solution where a bathtub is no longer practical for users with mobility difficulties or requiring wheelchair access.

Once fitted an Eagle TWO tray provides barrier-free, level access in an alcove space (between three walls).

This tray can be cut to length from either end, from 1850mm down to 1500mm, supplied with an end plate to enclose the cut end of the tray allowing you to fit the exact space left by the previous bath.

Key benefits:

  • Tray length 1850mm, 745 or 845mm width
  • Tray can be cut to length from 1850mm to 1500mm as required
  • Barrier free, level access - assists effortless wheelchair entry
  • Quick and easy to install
  • Anti-slip surface for an assured underfoot grip
  • For tiled floor finishes only

Waste options:

ST90CPB-P-70 Gravity Waste

  • 50mm water seal
  • 90mm diameter
  • 70mm depth
  • Flow rate approximately 35 litres per minute
  • Manufactured by McAlpine

UPSW-4 Pumped Waste

  • To be used in conjunction with a shower waste pump
  • Top access, easy to clean
  • 22mm outlet
  • 110mm chrome plate flange and petal grid fitting
  • 32mm depth
  • Manufactured by McAlpine
  • Pump not included

Technical details:

  • Size (mm): 1850x745 or 1850x845
  • Max load (kg): 270
  • Tray can be trimmed at either end down to 1500mm - 1 x end plate supplied to conceal cut end
  • Unhanded - tray has a central waste and three tiling lips for alcove installation (between three walls)
  • Manufactured in the UK from Glass fibre-reinforced plastic (GRP)
  • Locate in wooden or solid floors - minimal need for additional support under the tray
  • Requires only 18mm of existing floor to be removed (apart from the trap area)
  • The 14mm tiling lip is watertight and will easily accommodates wallboards and wall tiles

Warranty:

  • Lifetime manufacturer warranty

Manufacturer product codes:

  • Tray only, no TRUESEAL2 code: ET745NTNW, ET845NTNW
  • Tray with gravity waste, no TRUESEAL2 code: ET745NT, ET845NT
Technical Information
Manufacturer AKW / Contour
Model AKW / Contour - Eagle TWO
Cut to Length Range (mm) 1500-1850
Tray Size (mm) 1850x745 - Can be cut down to 1500, 1850x845 - Can be cut down to 1500
Handing Unhanded
Entry Configuration Front Entry (Alcove)
Step-in Height (mm) Level Access - 0
Thickness of Tray (mm) 26
Waste Compatibility Gravity Waste, Pumped Waste
Tray Edge for Floor Finish No TRUESEAL2 - Tiles
Stock status Made to order
Delivery timePlease Email for a lead time
Returns Status Returnable in 14 days
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code: EAGLE_NT
Availability Made to order (Info)
Expected delivery Please Email for a lead time
VAT Exemption is available on this product - deducted at Checkout (Info)
AKW / Contour Eagle TWO bath replacement cut to length shower tray for level access. Unhanded. Front entry alcove tray. Suitable for timber or solid floors. For tiled floor finishes. McAlpine gravity or pumped waste options. 26mm thick. Manufactured in the UK from Glass fibre-reinforced plastic (GRP). Max load: 270kg. Choice of sizes 1850x745m and 1850x845mm, each can be reduced in size to 1500mm. End plate supplied for the cut edge.
In stock
As low as £423.35 £352.79

* Required Fields

Download PDF Download PDF

We accept the following payment methods

PayPal
PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque