AKW Mullen Surface or Level Access, Cut-to-Length 1800x700mm Alcove SHWR Tray - Choice Waste

Ideal for bath replacements, the alcove AKW Mullen 1800mm cut-to-length shower tray x 700mm depth + 50mm flange, the 1800mm length can be trimmed by up to 275mm from each end. Supplied with stop ends to give a strong mechanical waterproof joint. Quick and easy installation. 27mm thick for recessing in screed or timber floors for level access or can be surface mounted. Slip resistant textured surface, a strong and stable tray manufactured from compressed GRP. Vinyl safety flooring can be clamped to the side of the tray for a leak free floor. Wall boards, pipe ducting and floor tiles can be used with adapter kits. Compatible with AKW Standard, Sliding, Glass and Silverdale shower screens. Max. load 190kg. 90mm waste hole with a choice of GW90 Gravity or PW90 Pumped wastes with 15 or 22mm outlets.

The AKW Mullen alcove cut-to-length shower tray can be trimmed by up to 275mm from each end and is supplied with specially designed stop ends to give a strong mechanical waterproof joint allowing you to trim the tray on site for the perfect fit making the tray ideal for bath replacements.

The shower tray is 27mm thick tray, range of sizes and handing. The rear central 90mm waste hole allows quick and easy installation to avoid joists. Choice of GW90 Gravity or the PW90 Pumped wastes with either 15 or 22mm outlets.

Suitable for timber and screed floors, can be surface mounted or recessed for level access. The trays slip resistant textured surface decreases the risks of accidents when using the shower.

Vinyl safety flooring can be clamped to the side of the tray for a leak free joint. Non-slip floor tiles can be used which also requires the Floor Tiling Adaptor kit (Product code: 26259).

The tray is compatible with AKW Standard, Sliding, Glass and Silverdale shower screens, check the image gallery for the compatibility chart.

Key benefits:

  • Alcove shower tray for level access where the client needs a defined showering area
  • Unique vinyl safety flooring integrated clamping strip allows for quick and watertight installations
  • Flooring can be fitted after the tray and screen have been installed avoiding unnecessary site visits
  • Built in tiling upstands on 3 sides complete the all-round integrity of the water seals
  • Suitable for point loading from seats
  • Weight limited 190kg / 30 stone
  • No under tray foaming is needed
  • Ribbed underside eliminating slippage or float during installation
  • Watertight seals with the Intergrip® strip for joining vinyl sheet flooring to the tray edge
  • Quick draining, with a 25mm fall inside the tray
  • Unrivalled strength and stability, using compressed GRP
  • Pre-formed fixing holes ensure quick and easy installation
  • Slip resistant textured surface
  • Floor tiling, wallboard adaptor, and pipe duct kits are available separately to aid any installation

Waste options:

    AKW: 25120 - GW90 90mm Dia. Gravity Waste (50mm Water Trap)

  • - Flow rate: approx. 31 litres per minute
  • - Installation depth required below tray (mm): 90
  • AKW: 25434 - GW90 Metal Topped 90mm Dia. Waste

  • - Flow rate: approx. 31 litres per minute
  • - Installation depth required below tray (mm): 60
  • AKW: 25404 - Low Depth GW90 Waste (50mm Water Trap)

  • - Flow rate: approx. 14 litres per minute
  • - Installation depth required below tray (mm): 60
  • AKW: 25492-UK - DW90 Low Depth Dry Shower Waste

  • - Non return valve ensures the trap always retains water
  • - Flow rate: 27 l/min with 15mm head and 1m of pipe
  • - Installation depth required below tray (mm): 48
  • AKW: 25105 / 25406 - PW90 Pumped Waste

  • - Outlet pipe (mm): 15 / 22
  • - Installation depth required below tray (mm): 36
  • Technical details:

    • 27mm tray height
    • 1800mm width tray that can be trimmed by up to 275mm off both ends, supplied with a cut-to-length kit
    • 700 tray depth + 50mm flange
    • Screed floors require a 27mm recess for level access
    • Can be surface mounted on screed floors, ramps are available for installation above or below vinyl flooring
    • Timber floors require plywood (not included) to increase the floor up to the tray height, for complete level access
    • Central 90mm waste outlet hole
    • Choice of gravity or pumped wastes
    • Unrivalled strength and stability, manufactured from compressed GRP

    Warranty:

    • Lifetime manufacturer warranty

    Manufacturer product codes:

    • Tray only code: 26108 (Non-handed)
    • Tray with Gravity Waste code: 26112 (Non-handed)
Technical Information
Manufacturer AKW / Contour
Model AKW - Mullen
Cut to Length Range (mm) 1250-1800
Tray Size (mm) 1800x700 - Up to 275 can be cut off (both sides)
Handing Unhanded
Entry Configuration Front Entry (Alcove)
Step-in Height (mm) Level Access - 0, Low Level Step-in - 27
Thickness of Tray (mm) 27
Waste Compatibility Gravity Waste, Pumped Waste
Tray Edge for Floor Finish Yes - Vinyl or Tiles
Ramp or Step Available Ramp
Stock status In stock
Delivery timeNext working day if ordered by 1.30pm
Returns Status Returnable in 14 days
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code: MULLEN-CTL
Availability In stock (Info)
Expected delivery Next working day if ordered by 1.30pm
VAT Exemption is available on this product - deducted at Checkout (Info)
Ideal for bath replacements, the alcove AKW Mullen 1800mm cut-to-length shower tray x 700mm depth + 50mm flange, the 1800mm length can be trimmed by up to 275mm from each end. Supplied with stop ends to give a strong mechanical waterproof joint. Quick and easy installation. 27mm thick for recessing in screed or timber floors for level access or can be surface mounted. Slip resistant textured surface, a strong and stable tray manufactured from compressed GRP. Vinyl safety flooring can be clamped to the side of the tray for a leak free floor. Wall boards, pipe ducting and floor tiles can be used with adapter kits. Compatible with AKW Standard, Sliding, Glass and Silverdale shower screens. Max. load 190kg. 90mm waste hole with a choice of GW90 Gravity or PW90 Pumped wastes with 15 or 22mm outlets.
In stock
As low as £489.70 £408.08

* Required Fields

Download PDF Download PDF

We accept the following payment methods

PayPal
PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque