P12 Pump Kit B w/ USG1 Gully for Floor Formers (with 1x Flow Switch)

P12 shower wastewater pump, variable speed, universal 22mm inlet and outlet, and 2m flexible 22mm hose. Includes a McAlpine USG1 pumped waste for wet room floor with a 200mm overall diameter. For vinyl flooring only. Includes 1x Flow Switch. Optional additional flow switch for fitting to the hot feed of mixer showers, where a flow switch should be fitted on both the cold and hot water supply feeds, Control box cover and Flow switch covers.

The P12 shower waste water pump is designed for use when gravity drainage is unavailable.

Quiet and maintenance-free, this pump will easily cope with hair, shower gels and small obstructions that would normally cause a blockage.

This version of the P12 is supplied with a USG1 white pumped waste for use with wet room floor formers with vinyl flooring and can be used with any electric or mixer shower which will require an extra Flow Switch.

Key benefits:

  • Peristaltic pump design
  • Near silent operation
  • Safe 24v DC low energy motor, with low running costs
  • Control box with built in test facility
  • ABS Wall plate with quick release pump bracket, minimises installation time
  • Supplied with a 2 metre length of 22mm flexible pipe for improved performance
  • Wastewater is pumped through a sealed tube reducing the risk of blockages
  • Self-priming up to 500mm
  • Pumps up to 12 litres per minute
  • Variable speed transformer for precise control
  • Easily adjustable run-on timer
  • Match the speed of pump to flow of water
  • Maintenance free design
  • Not handed for easy and quick installation
  • Supplied with push fit pump housing cover
  • Manufactured in the UK from parts that are 100% recyclable

Includes McAlpine USG1 pumped waste:

  • Easy to clean waste trap for wet room floor formers
  • Suitable for vinyl flooring
  • Manufactured in white ABS - withstands wheelchair loading
  • 200mm overall diameter
  • 45mm in depth
  • 22mm outlet, with increased length for ease of installation

Floor former compatibility:

  • Compatible with floor formers with a 200mm overall dia. waste hole outlet
  • For optimum performance of 12 litres per minute, Contour recommend the pump is installed no higher than 350mm from the top of the waste outlet to the underside of the wall plate
  • The pump can be installed up to a maximum of 500mm but this will reduce the pump's overall performance
  • The maximum length of the flexible pipe from the waste to the pump should be no more than 2m
  • Can be retrofitted and is compatible with all wastes with a 22mm outlet
  • If you want to use larger outlet pipework a suitable 22 - 40mm connector can be used
  • Install so that the outlet side of the pump is slightly higher than the soil pipe connection, this will ensure a clean flow away from the pump, and help to keep the pipework clear

Shower compatibility:

  • Suitable for electric showers - includes 1x Flow Switch which should be installed in the cold water supply
  • Suitable for mixer showers - select if an additional Flow Switch (Product Code: 05PP11) for the hot water supply
  • If you are installing a Redring Selectronic Premier WP, Mira Advance ATL Flex Extra or the Triton Safeguard+. order alternative 'Link' Pump Kit B (Product Code: 05PP01B-L)
  • When linking directly with a Mira Advance Flex Extra or Redring Selectronic Premier WP, Re-tighten the gland and connect the electric shower cables to the terminals marked flowswitch
  • See installation instructions in the “Installation and Help Guides tab” for more information

Optional covers:

  • Control Box Cover (Product Code: 05PP16)
  • 1x Flow Switch Cover (Product Code: 05PP17)
  • 2x Flow Switch Cover (Product Code: 05PP17x2)

Technical details:

  • Actual pump size (mm): 205 W x 270 H x 180 D
  • Pump housing cover size (mm): 210 W x 330 H x 190 D
  • Power Consumption 36 Watts intermittent rating
  • 2.5 amp Fast blow fuse
  • IP65 Enclosure for bathrooms
  • Pump complies to BS7671

Warranty:

  • 7 year manufacturer warranty (based upon correct installation and appropriate application)
Technical Information
Manufacturer AKW / Contour
Application Vinyl Sheet Safety Flooring, Floor Former
Stock status In stock
Delivery timeNext working day if ordered by 1.30pm
Returns Status Returnable in 14 days
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code: 05PP01B
RRP Inc. VAT: £982.80 Save 56%
Availability In stock (Info)
Expected delivery Next working day if ordered by 1.30pm
VAT Exemption is available on this product - deducted at Checkout (Info)
P12 shower wastewater pump, variable speed, universal 22mm inlet and outlet, and 2m flexible 22mm hose. Includes a McAlpine USG1 pumped waste for wet room floor with a 200mm overall diameter. For vinyl flooring only. Includes 1x Flow Switch. Optional additional flow switch for fitting to the hot feed of mixer showers, where a flow switch should be fitted on both the cold and hot water supply feeds, Control box cover and Flow switch covers.
In stock
£430.06 £358.38

* Required Fields

Download PDF Download PDF

We accept the following payment methods

PayPal
PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque