Granberg Wall Mounted Cranked Combi Kitchen Module - ES20S4 - Right, Choice of Widths 2190 / 2390mm

Granberg’s Combi Kitchen Module 6350-ES20S4R, wall mounted with 300mm of step less height adjustment by a cranked winding handle with a 30mm White laminate worktop. The worktop lift features a right hand ES20 under-glued inset kitchen sink with one shallow sink bowl, one shallow rinsing bowl and overflow with a left hand custom size cut-out for a 4 zone cooking hob.

FM Mattsson kitchen monobloc mixer tap with a 190mm easy to reach lever and swivel spout.

The folding crank handle, prevents removal and theft, that can be ordered left or right hand mounted.

Pre-fitted front facia, the rear cover panels are easy to fit and hide the legs and services.

The modules are manufactured 10mm shorter in width, to allow for a 5mm clearance gap at both ends for safe movement, ideal for the direct replacement of 2200 and 2400mm width cabinets. The module has a reduced depth of 15mm to accommodate splashbacks and wall tiles.

This 6350-ES20S4R cranked combi kitchen module is also available with a right-hand hob cut-out and left-hand sink. Also available in Electric wall mounted and floor standing variations.

Key benefits:

• Right hand combi kitchen module with 300mm of hand cranked height adjustment, 700-1000mm above floor, plus the 30mm worktop
• Worktop décor - K1040 Un 30mm White Laminate finished with a brushed aluminium rear edge trim
• Folding crank handle, prevents removal and theft
• The wall mounted legs are concealed by 2x matt white sliding cover panels with 2x dark grey coloured steel end plates
• Tilt able worktop plane for adjustment
• Full extension drawers can be added (except; below the hob) as a factory fitted option - (Contact us if required)
• Range of widths 2190 and 2390mm to suit standard kitchen base unit spaces: 2200 and 2400mm
• The modules are 10mm shorter in width to allow for a 5mm gap both sides of the unit for the up/down movement
• Adjustable depth 576-606mm including the Alu. front to suit adjoining cabinets and worktops
• 100mm free space below the foot of each leg for services
• Quick solution, top frame supplied pre-assembled for fast site installation
• White Powder Coated RAL 9003 aluminium 103mm facia front with plastic end caps
• Right hand mounted ES20 one shallow sink bowl, one shallow rinsing bowl with overflow. Inset and under-glued into the worktop
• FM Mattsson kitchen monobloc mixer tap with 190mm easy reach lever and swivel spout that can be adjusted to 60°, 85°, 110°, 360° or fixed
• Left hand custom cut-out, to suit your electric cooking hob (do not fit gas hobs)
• All components available separately

Cranked Combi Kitchen Module 6350-ES20S4 Right includes:

• Wall mounted manual worktop lift 6350 with 2x legs
• Folding crank handle, prevents removal and theft, right or left hand located - as per the product image
• 2x 12mm matt white melamine cover panels hide service installations under the worktop
• White aluminium front facia
• Worktop décor - K1040 Un 30mm White Laminate
• Brushed aluminium rear edge strip
• Right hand ES20 under-glued inset sink with 2x shallow traps, strainer wastes and a flexible drain hose
• FM Mattsson Mixer tap with long lever and flexible water hoses
• Left hand customizable cut-out, to suit your electric cooking hob

Recommended accessories:

• Full extension, push-to-open integrated drawers
• Cutlery trays
• Kitchen sink heat insulation pads
• Mini cabinet on wheels

Technical details:

• Height adjustment: Manually cranked steplessly adjustable by 300mm (700 - 1000mm excl. worktop)
• Crank handle inset from left- or right-hand side of the worktop end by 235mm
• Folding crank handle, prevents removal and theft
• 1x turn for height adjustment of 10mm
• Max. distributed load / Lifting force: 100kg (220lbs)
• Frame depth: 576 - 606mm from the wall (Incl. front)
• Tilt able worktop plane for adjustment
• Front height: 103mm
• All fittings for assembly supplied, wall fixings not included
• Space to adjoining wall / cabinet side (mm): 5
• Space to wall (for tiles): 15mm
• Tiling: From 700 mm above the floor (alternatively tile down to floor level)
• Worktop frame Material: Aluminium frame
• ES20 sink overall size: 616mm width x 496mm depth
• Main bowl size: 400mm width x 340mm depth x 120mm deep
• Rinsing bowl size: 160mm width x 295mm depth x 120mm deep
• Plate thickness: 0.8 mm, brushed stainless steel
• Shallow traps, strainer wastes and a flexible waste kit

4-zone Hob cut-out (The hob shown in images is not included):

• Inset by 100mm from the Left-hand end of worktop
• Pre-cut to your specified dimensions
• Inset from the front by 100mm
• Specify your Width x Depth (mm), as per your hob manufactures installation instructions

Warranty:

• 2-year manufacturer warranty

Please note:

• Due to the custom nature of this product, it is made-to-order and is therefore non-returnable
• Note: The Tap hole is not pre-drilled