iDRY Body Dryer - Anthracite

The iDRY Body Dryer is an all-over body dryer for the bathroom, shower room or wet room.

Its gentle air jets dry the whole body with perfectly balanced heat, eliminating the use of towels. Using the iDry Body Dryer requires no water to use and can save up to 70 litres of water used to wash a towel.

It is very easy to use, and is operated by a simple bellows air pressure hand/foot switch for wall or floor mounting.

This version is Anthracite in colour, the iDry is also available in White and Latte colours.

Key user benefits:

• Keeps a patient at home longer
• Allows the patient to maintain independence
• Give the ability to return home earlier after discharge
• Reduce domiciliary care if able to easily self-use
• Enable confidence and wellbeing by ability to shower and bathe
• Promote essential skin health and integrity
• Relieve pressure from main care providers such as spouse or partner
• Great for infection control

Key product benefits:

• Designed and manufactured in Britain - robust and attractively styled
• Fits neatly into the corner of most shower areas
• Long-life motor is thermally protected and tested to rigorous safety standards
• Remarkably affordable - the body dryer’s price compares favourably with the cost of laundering towels
• Requires 0.145 kilowatts for a 3-minute run (0.15 kWh per use)
• Two speed on/off control - hand/foot switch can be mounted anywhere on the wall or floor
• Suitable for installation above baths - see installation notes below
• Also ideal for spray tan salons

Installation above a bath:

• The leg can be cut down in length for installation above baths
• The cut must not be made across the air holes, otherwise the body dryer will 'whistle' when in use
• The bottom leg can be reduced by a maximum of 44cm
• However, the head of the unit must be installed close to the ceiling
• The foot which fits onto the bottom of the leg will require mechanically fixing (i.e. a screw or glue)

Technical details:

• Colour: Anthracite
• Air pressure control: Wall or floor mounted, with a clear pvc air tube controlling the dryer
• Overall body dryer height (mm): 2050
• Head of body dryer height (mm): 220
• Head of body dryer side length (mm): 275
• Head of body dryer depth (mm): 265
• Overall body dryer leg length (mm): 1800
• Leg of body dryer unit side length (mm): 90
• Leg of body dryer unit side depth (mm): 70
• Bottom mounting plate dimensions (mm): 90 x 90 x 12
• Average air outlet temperature: 38°C
• *Dependent on room temperature, output temperature can be 3 - 4°C above ambient
• Supplied with a 3m power cord - to be connected via a switched fused spur and RCD to your electrical supply
• Voltage: 220/240v
• Amperage: 12.8 amps
• IP Rating: IPX4
• Nominal output: 2.9 kilowatts
• EU directives 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive
• Materials: White durable, wipe clean ABS plastic
• Fully sealed and waterproof
• The dryer can be wiped down with warm soapy water or any good quality detergent
• CE and UKCA certified

Warranty:

• 2 year manufacturer warranty

Please note:

• The unit must be installed in accordance with current Electrical Regulations
• This product is also known elsewhere as the Tornado Body Dryer and formerly the Après Body Dryer