Innovations Bonding & Priming Agent for the Hydromat and Liquid Membrane Tanking Systems - 1 Litre

Availability In stock (Info)
Expected delivery Next working day if ordered by 2pm
VAT Exemption is not available on this product (Info)
Product Code: 1LP
RRP Inc. VAT: £16.90 Save 16%
Adhesion promoter for walls and floors. 1 Litre pack. For use in promoting adhesion and reducing the porosity of plaster, timber, concrete, and porous surfaces. READ MORE
Ex. VAT: £11.82 Inc. VAT: £14.18
 

You may also be interested in...

Innovations Fabric Tanking Pipe Collar - 120 x 100mm

Innovations Fabric Tanking Pipe Collar - 120 x 100mm

Product Code: TK013

Ex. VAT: £5.61 Inc. VAT: £6.73
Innovations Fabric Tanking Jointing Tape - 10m

Innovations Fabric Tanking Jointing Tape - 10m

Product Code: TK010

Ex. VAT: £16.48 Inc. VAT: £19.78
Innovations Fabric External Tanking Corner - 120 x 120mm

Innovations Fabric External Tanking Corner - 120 x 120mm

Product Code: TK012

Ex. VAT: £6.56 Inc. VAT: £7.87
Innovations Fabric Internal Tanking Corner - 120 x 120mm

Innovations Fabric Internal Tanking Corner - 120 x 120mm

Product Code: TK011

Ex. VAT: £6.56 Inc. VAT: £7.87

Product Description

Details

Innovations bonding and priming agent liquid for use in promoting adhesion and reducing porosity of a variety of surfaces.

Fully compatible with the Innovations liquid tanking membrane system and the Hydromat self adhesive membranes.

Preparation:

  • Ensure surface to be treated is completely dry and free of dust

Application:

  • Ensure all surfaces are dry and free from debris, including dust, oil, wax and other contaminants that may effect adhesion
  • Smooth or glazed surfaces should be abraded to provide a mechanical key
  • Apply using a brush or roller at the recommended strength and allow to dry before tiling
  • Concrete and porous surfaces: Apply 1 coat diluted to 3 parts water to part bonding agent
  • Plaster: Apply 1 coat diluted to 3 parts water to part bonding agent. Then apply 2 neat coats to plaster before applying any cementitious adhesive
  • Timber: Apply 1 coat diluted to 1 parts water to part bonding agent

Technical details:

  • Pack size: 1 Litre
  • Storage: Store unopened in cool dry conditions, protect from frost
  • Application temperature: Between 5°C and 30°C
  • The product is water based and will dry in approx. 1 hour in good drying conditions
  • Health and Safety: Contains biocide, may cause an allergic skin reaction

Note:

  • Can be used where dame conditions are likely, but not in areas where rising damp is present

Technical Information

Additional Information

Manufacturer Wetroom Innovations
VAT Exemption Available No

Installation and Help Guides

Product Downloads

Simply copy this text directly into your tender document...

Innovations Bonding & Priming Agent for the Hydromat and Liquid Membrane Tanking Systems - 1 Litre

Product code: 1LP

Adhesion promoter for walls and floors. 1 Litre pack. For use in promoting adhesion and reducing the porosity of plaster, timber, concrete, and porous surfaces.

Website: www.independent4life.co.uk
Email: [email protected]
Tel: 02392755992

We accept the following payment methods

PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque