Pressalit Care SELECT Wash Basin Bracket, Wall-mounted with Floor Support, Electrically Height Adjustable with Lever Control - Choice of Colour

Electric height adjustable washbasin lift from the Pressalit Care SELECT range with lever control for mounting the Pressalit Care Matrix Curve, Matrix Curve II or Matrix Small wash basins.

Lever controlled, it provides 300mm of continuous step-less adjustment, between 670-970mm when mounted at floor level.

The basin lift front panel is available in 3 colours, Anthracite grey, White and Lime green.

Key benefits:

• 300mm Stepless electrical adjustment
• Electrically operated with lever control - allows user to adjust the height of the basin themselves
• The height of the wash basin is easily adjusted by means of the lever control
• The lever control is placed by the front of the wash basin
• The lever control can be placed on the left or right-hand side of the wash basin
• Suitable for regular height adjustments - ideal for multi-user environments
• The arm that holds the lever control can also function as a towel rail
• The lever control is strong enough to be used as an extra support
• Concealed plumbing - hygienic
• Smooth surfaces are easy to clean and attractive to look
• The sleek design greatly facilitates cleaning
• Includes fixing kit for basin (excludes wall fixing kit)

Compatibility:

• Compatible with the Pressalit Care MATRIX CURVE, MATRIX CURVE II and MATRIX SMALL washbasins
• Possibly compatible with other washbasin manufacturers, please refer to the installation guidance and technical specifications

Technical details:

• Height adjustment range (mm): 300
• Width (mm): 666
• Min. Height of bracket (mm): 750
• Total projection from the wall (excluding basin) (mm): 170
• Length of lever control arm (mm): 390
• Weight (kg): 28.5
• For washbasins weighing (kg): 16-22
• Max load (including washbasin) (kg): 150
• Speed, up (mm/s): 21
• Speed, downwards (mm/s): 21
• Noise level (dB): 45
• Note: Care should be taken to avoid entrapment either side of the basin lift

Electrical technical details:

• Please refer to the PDF download for the installation instructions
• Duty cycle: The motor can be used for a maximum of 2 minutes of continuous operation, followed by 18 minutes pause
• Mains connection (V): 230
• Mains cable length to Transformer (mm): 3500
• Current (A): 3.7
• Hz: 50-60
• Electrical rating (IP): IPX4
• Power consumption (max. load) (W): 75
• Power consumption (standby) (W): 1.5
• Actuator (motor): LA31 Careline, (Linak), 1500N, IPX4
• Control box: CB9 Careline, (Linak), IPX6
• Note: Upon installation the 2-pin plug must be removed and hard wired to a fused spur, as per electrical regulations

Materials:

• Wash basin lifter: Mainly constructed of anodised aluminium
• Front plate and the bottom plate: Made of polystyrene (PS)
• Lever control: ABS polymer switch at the end of an anodized aluminium arm

Declaration of conformity:

• Complies with the requirements of Council Directive 93/42/EEC concerning medical devices, as last amended by Council Directive 2007/47/EC of 5 September 2007
• It also complies with all relevant requirements in the Council Directive 2006/42/EC (of 17 May 2006) on machinery and the Council Directive 2011/65/EC on RoHS

Pressalit Care recommended optional; waste kit:

• 700mm Flexible Feeds and 700mm Flexible Waste System (Product Code: R2075)

Warranty:

• 5 year manufacturer warranty

Manufacturer product codes:

• R4950000, R4950112, R4950277