Purus Fabric Floor Drain Gasket - 400 x 400mm for Tiled Flooring - No Hole

Fabric floor drain gasket by Purus, designed for improved performance of wet room waterproofing systems with Maxxus Floor Formers when installing a Purus gravity waste with tiled flooring or any wet room floor where a waterproof and flexible joint is required around the waste. Liquid tanking membrane must be applied to this product when installing.

Key benefits:

• 400 x 400mm
• Flexible yet durable material
• Compatible with Purus wet room wastes for tiled floors

How to install:

Apply liquid tanking membrane around the Drain Gasket and bond into place. The inner clamping ring of the Purus shower waste should be used to clamp in place around the gully. When dry apply a further coat of the liquid Wet Room Waterproofing Membrane to create a flexible yet waterproof seal and allowed to dry before fixing floor tiles.

Compatible Purus Shower Wastes, to make the hole cutting easier you can also purchase the Purus Reusable Purus Knife 130 (Product Code: 7113605) to cut the waste hole accurately:

• Product Code: 7113764UK - Purus Minimax 50 with Horizontal Outlet and a NOOD no-odour Water Trap
• Product Code: 52719 - Purus Minimax Two Part Wet Floor Waste Gulley with Horizontal Outlet and a NOOD no-odour Water Trap
• Product Code: 7113535UK - Purus Mini Oden 50 Horizontal Outlet with a NOOD no-odour Water Trap
• Product Code: 7113538UK - Purus Mini Brage 110 Vertical Outlet with a NOOD no-odour Water Trap
• Product Code: 7113539UK - Purus Mini Brage 50 Vertical Waste Outlet with a NOOD no-odour Water Trap