Purus Living Plus 900mm Linear Drain, Vinyl Floor, Stainless Steel Grate - Outlet Choice
Purus 930mm Living Plus linear channel drain for wet rooms with vinyl sheet flooring with a maximum thickness of 3mm.
Designed for use with concrete / screed floors only. For timber floors use the 600 or 800mm Purus Living Plus Linear Drains.
Key benefits:
- 930mm length linear channel drain
- PP - bodied unit
- Removable sprung NOOD water trap
- The NOOD no-odour water trap which will not allow any foul air to escape even if the gully dries out
- Removable stainless steel channel grate - Chess design
- The grate when installed will be flush with the vinyl sheet flooring, due to the new clamping ring technology
- For vinyl sheet floor finishes, that should be secured in the gully clamping frame
- Includes 2 x support legs for screed floors
Technical details:
- Overall length (mm): 930
- Overall width (mm): 130
- Grate length (mm): 888
- Grate width (mm): 88
- Depth of channel (mm): 21, (plus depth of gully outlet - see below)
- Grate loading: Class K 3 (300 kg)
- Maximum vinyl sheet flooring thickness (mm) 3
Waste options:
- Choice of three NOOD water trap outlets each with a push-fit ABS pipe reducer 2” to 1½” (50mm to 40mm):
- Product Code: 53321 - Side Outlet with 60-72 Ltr/min flow rate - Waste depth / Overall (mm): 105 / 126
- Product Code: 53322 - Low Side Outlet with 30-36 Ltr/min flow rate - Waste depth / Overall (mm): 52 / 73
- Product Code: 53323 - Side Side (End Parallel) Outlet with 60-72 Ltr/min flow rate - Waste depth / Overall (mm): 105 / 126
- Please select as desired
Installation Guidance:
- The minimum gradient should be 1:150 to ensure the flow of water to the floor trap and no more than 1:50 to reduce the risk of slipping
- A nominal 2% falls is usually used
- Do not install the product on a raised platform. It is designed only to be installed level with the surrounding floor
Concrete / Screed Floor Installation:
- Build falls to the gully with screed so water can run into it
- Supplied with 2 x plastic concrete supports, for setting the gulley height and level prior to casting the concrete screed
- The Concrete supports have a min. height of 88mm and a max height of 195mm with a distance case at 50mm
- Refer to the PDF download installation instructions for more information
Warranty:
- The design life of the Purusline Living Plus is 25 years, as long as they are installed and used following the installation and maintenance instructions and only in use with normal shower water.
Manufacturer | Purus |
---|---|
Configuration | 900mm Linear Drain |
Installation | Floor Formers, Concrete / Screed Floors, Timber Floors |
Application | Screed Floors |
Waste Depth / Outlet Position | 105mm / Side, 52mm / Low Side, 105mm / Side Side (End Parallel) |
Flow Rate / l/min | 30-36, 60-72 |
Floor Finish | Vinyl Sheet Flooring |
Grate Material / Finish | SS / Chess Grid |
Stock status | In stock |
---|---|
Delivery time | Next working day if ordered by 2pm |
Returns Status | Returnable in 14 days |