Purusline Living 800mm Linear Drain, Tiled Floor/Tile Insert, Outlet Choice

Purus 830mm actual length linear channel for Maxxus linear floor formers, timber, and concrete floors with a clamp for the drain gasket for tiled flooring. Removable NOOD no-odour trap with removable stainless-steel Tile Insert tray. Choice of Low, Side and Side Side (End Parallel) outlet with NOOD water trap and a 50 to 40mm outlet adaptor.

Purus 830mm Living linear channel drain for wet rooms with tiled flooring.

Designed for use with concrete / screed floors and timber floors. This version features the tile insert grate, for you to insert your floor tile. Also available in a kit form with the Maxxus Linear floor former and tanking kit for tiled floors (See Product Code: 68219-xx).

Key benefits:

  • Purusline Living 830mm length linear channel drain
  • PP - bodied unit
  • Removable sprung NOOD water trap
  • The NOOD no-odour water trap which will not allow any foul air to escape even if the gully dries out
  • Removable stainless-steel tile insert
  • Includes a tanking collar
  • Requires a tanking system (not included) to waterproof, before laying a tiled floor finish (available separately)
  • Includes 2 x support legs for screed floors
  • Includes a joist installation kit for timber floors
  • Choice of waste outlet

Technical details:

  • Overall length (mm): 830
  • Overall width (mm): 133
  • Overall grate length (mm): 755
  • Overall grate width (mm): 60
  • Tile insert length (mm): 740
  • Tile insert width (mm): 43
  • Depth of tile insert (mm): 12
  • Min. / Max. tile thickness including adhesive (mm): 10 / 26
  • Depth of channel (mm): 21, (plus depth of gully outlet - see below)
  • Grate loading: Class K 3 (300 kg)

Waste options:

  • Choice of three NOOD water trap outlets each with a push-fit ABS pipe reducer 2” to 1½” (50mm to 40mm):
  • Product Code: 52743 - Side Outlet with 60-72 Ltr/min flow rate - Waste depth / Overall (mm): 105 / 137
  • Product Code: 52745 - Low Side Outlet with 30-36 Ltr/min flow rate - Waste depth / Overall (mm): 52 / 94
  • Product Code: 52744 - Side Side (End Parallel) Outlet with 60-72 Ltr/min flow rate - Waste depth / Overall (mm): 105 / 141
  • Please select as desired

Installation Guidance:

  • The minimum gradient should be 1:150 to ensure the flow of water to the floor trap and no more than 1:50 to reduce the risk of slipping
  • A nominal 2% falls is usually used
  • Do not install the product on a raised platform. It is designed only to be installed level with the surrounding floor
  • Please note: This Linear drain channel will also require a wet room tanking system to complete the floor and walls, before tiling and use (not included)
  • Tile to the desired pattern, using C2 tile adhesive and C2 grout
  • Min. / Max. tile thickness including adhesive (mm): 10 / 26

Concrete / Screed Floor Installation:

  • Build falls to the gully with screed so water can run into it
  • Supplied with 2 x plastic concrete supports, for setting the gulley height and level prior to casting the concrete screed
  • The Concrete supports have a min. height of 88mm and a max height of 195mm with a distance case at 50mm
  • Refer to the PDF download installation instructions for more information

Timber Floor Installation:

  • Check the level of the joists and floorboards prior to installation of the tray and marine ply. They must be flat and level
  • The joists and floor must be made sound and secure according to BS 5268 and for BS 6178 if using joist hangers
  • Noggins or structural supports need to be added to the joists. These are required to add extra support for the linear channel / floor former
  • Refer to the PDF download installation instructions for more information

Warranty:

  • The design life of the Purusline Living is 25 years, as long as they are installed and used following the installation and maintenance instructions and only in use with normal shower water.

Manufacture product codes:

  • 52743, 52744, 52745
Technical Information
Manufacturer Purus
Configuration 800mm Linear / Channel Drain
Installation Floor Formers, Concrete / Screed Floors, Timber Floors
Application Floor Former, Screed Floors, Timber Floors
Waste Depth / Outlet Position 105mm / Side, 52mm / Low Side, 105mm / Side Side (End Parallel)
Flow Rate / l/min 30-36, 60-72
Floor Finish Tiled Flooring
Grate Material / Finish Stainless Steel / Tile Insert
Stock status In stock
Delivery timeNext working day if ordered by 2pm
Returns Status Returnable in 14 days
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code: 52743-5
Availability In stock (Info)
Expected delivery Next working day if ordered by 2pm
VAT Exemption is available on this product - deducted at Checkout (Info)
Purus 830mm actual length linear channel for Maxxus linear floor formers, timber, and concrete floors with a clamp for the drain gasket for tiled flooring. Removable NOOD no-odour trap with removable stainless-steel Tile Insert tray. Choice of Low, Side and Side Side (End Parallel) outlet with NOOD water trap and a 50 to 40mm outlet adaptor.
In stock
As low as £315.83 £263.19
Download PDF Download PDF

We accept the following payment methods

PayPal
PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque