Union Touch Clean Disabled Door Facility Furniture, 150mm Lever - Non-handed
Disabled toilet door latch compliant with BS8300 and Approved Document M (ADM). Un-handed suitable for inward / outward opening and sliding doors between 20 to 44mm thick. Anodised aluminium finish with Touch Clean anti-bacterial coating.
With a large 150mm length satin aluminium lever, this door lock set is designed for use on disabled toilets to suit inward or outward opening swing doors or sliding doors.
Application:
- Non-handed so suitable for left and right handed doors
- Designed for toilet / bathroom doors where ease of operation is desired
- Suitable for hinged and sliding doors
- Suitable doors between 20 to 44mm thick
- Surface mounted
- Bolt-through fixing - can be fitted directly to cubicle or flush panel door
- Exterior handle pull may be fitted at 90°, 180°, 270° or 360°
Specification:
- Supplied with large lever handle, indicator with emergency release, angle strike, staple, bolt through fixings
- AS finish with Touch Clean anti-bacterial coating
- Material: Aluminium with black plastic moulded end caps
- Lever mechanism
- Locking bolt connected directly to lever handle at 90° to facilitate direction change
- Vertical position of lever handle bolts door that can be seen by occupant
- Lever handle travel limited to 30° by screw through centre of backplate - can be increased to 90° by removing screw
- Red and white occupancy signal
- Coin operated emergency release
- Lever length (mm): 150
- Handle Projection (mm): 77
- Plate Projection (mm): 44
- Bolt Length (mm): 41
- Minimum Door thickness (mm): 20
- Maximum Door thickness (mm): 44
Finish:
- Anodised silver
- Touch clean anti-bacterial coating
Standards:
- Assists in fulfilling duties under the Equality Act
- Satisfies recommendations of BS8300 and Approved Document M (ADM)
Manufacturer | Union |
---|
Stock status | In stock |
---|---|
Delivery time | Next working day if ordered by 2pm |
Returns Status | Returnable in 14 days |
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Write Your Own Review
Disabled toilet door latch compliant with BS8300 and Approved Document M (ADM). Un-handed suitable for inward / outward opening and sliding doors between 20 to 44mm thick. Anodised aluminium finish with Touch Clean anti-bacterial coating.
In stock
£44.22
£36.85
Product Code:
J37651
RRP Inc. VAT: £58.97 Save 25%


VAT Exemption is not available on this product (Info)
