Granberg Front Cover Panels for Baselift 6600 – Anthracite Melamine 164PE
Anthracite Melamine 164PE (NCS S 7502-G) front cover panels for the Granberg Baselift 6600, designed to conceal the lifting mechanism and installations beneath the worktop. Supplied as two 12 mm melamine panels, each 438 mm high, with a choice of 890, 1590 or 2390 mm widths. The lower panel sits on the floor, while the upper panel hangs from the worktop lift using the separately available Granberg Cover Panel Fitting Kit.
Give your Granberg Baselift 6600 installation a clean and professional finish with these Anthracite Melamine 164PE Front Cover Panels. Finished in NCS S 7502-G, the panels are designed to conceal the lifting mechanism, cables and other installations beneath the worktop while allowing the height-adjustable worktop to operate normally.
The set comprises two 12 mm melamine panels, each with a height of 438 mm. The lower panel sits on the floor in front of the lifting system and can be secured through fixing holes at the rear. The upper panel hangs from the fittings attached to the worktop lift and moves with the height-adjustable worktop.
The required Granberg Cover Panel Fitting Kit is not included and must be ordered separately. The fitting kit contains the components required to secure the lower panel and suspend the upper panel from the worktop lift.
Suggested use:
Front cover panels are recommended where the Baselift 6600 mechanism would otherwise remain visible beneath an open or height-adjustable worktop. They provide a neat and professional finish for accessible kitchens, demonstration areas, commercial projects and bespoke installations where conventional base cabinets are not fitted beneath the worktop.
Key benefits:
- Designed for the Granberg Baselift 6600 worktop lift
- Conceals the lifting mechanism and installations beneath the worktop
- Creates a clean, coordinated and professional appearance
- Supplied as two front cover panels
- Anthracite Melamine 164PE finish
- Colour reference: NCS S 7502-G
- Panel thickness (mm): 12
- Panel height (mm): 438
- Available in three widths
- Lower panel sits on the floor
- Upper panel hangs from the worktop lift using the Granberg fitting kit
- Panels can be cut, drilled and shaped by the installer to suit the installation
- Suitable for bespoke accessible kitchen projects
- Fitting kit required and sold separately
Available widths and product codes:
- Width (mm): 890 – Product code: 6260-089-07
- Width (mm): 1590 – Product code: 6260-159-07
- Width (mm): 2390 – Product code: 6260-239-07
Installation notes:
- Position the lower cover panel on the floor in front of the lifting system
- Drill the required fixing holes and secure the lower panel through the rear fixing points
- Fit the upper-panel components to the Baselift 6600 using the separately available Granberg Cover Panel Fitting Kit
- Hang the upper cover panel from the fittings so that it moves with the height-adjustable worktop
- Cut the panels to length where required
- Drill and shape the panels as necessary to suit the individual kitchen layout, worktop and surrounding fittings
- Check that the panels do not obstruct the movement or safety operation of the worktop lift
Please note:
The Granberg Cover Panel Fitting Kit is not included and must be purchased separately. These panels are intended for professional installation and may require cutting, drilling and shaping on site to achieve the correct fit.
| Manufacturer | Granberg |
|---|---|
| Compatible Model | Baselift 6600 |
| Colour | Anthracite Sablé (YW359F) |
| Stock status | Available to order |
|---|---|
| Delivery time | 7-10 working days |
| Returns Status | Returnable in 14 days |
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code:
6260-089-239-07
Available to order (Info)
7-10 working days VAT Exemption is available on this product - deducted at Checkout (Info)
Anthracite Melamine 164PE (NCS S 7502-G) front cover panels for the Granberg Baselift 6600, designed to conceal the lifting mechanism and installations beneath the worktop. Supplied as two 12 mm melamine panels, each 438 mm high, with a choice of 890, 1590 or 2390 mm widths. The lower panel sits on the floor, while the upper panel hangs from the worktop lift using the separately available Granberg Cover Panel Fitting Kit.
