Laminate Worktops – Tailor Made to Last

Accessible Kitchen Worktops

Granberg Laminate Worktops - Tailor Made to Last

Made-to-measure 30 mm worktops for accessible and height-adjustable kitchens, in three finished-depth ranges from 450 to 1200 mm. Choose from eight modern, stylish and practical décors, with availability shown by depth range.

Shop laminate worktops ↓ Compare finishes

30 mm worktop thickness 450–1200 mm overall depth range Three depth ranges 8 finishes

Granberg laminate worktop in an accessible kitchen

Made to suit the kitchen, not the other way around

Shop the range

Granberg Laminate Worktops

8 décors · 450–610 mm, 611–900 mm & 901–1200 mm depth · made to order

See the finish palette →

Browse by finished depth

Choose the depth range required for the kitchen.

A worktop specified around the installation

The useful part of bespoke is getting the dimensions right

Accessible kitchens rarely benefit from treating the worktop as a standard off-the-shelf component. The depth, overall length, sink position, surrounding furniture and lifting system all influence how the finished working area should be planned.

Granberg's laminate worktops are manufactured for the individual project rather than supplied as a single fixed-size slab. The Independent 4 Life range covers three finished-depth ranges — 450–610 mm, 611–900 mm and 901–1200 mm — making it easier to coordinate the surface with fixed-height accessible layouts, deeper islands and compatible Granberg height-adjustable systems.

The result is a conventional-looking worktop that can still be planned as part of an accessible kitchen rather than added after the lifting system has been chosen.

Standard-depth range450–610 mm

Seven finishes. White K1040 UN is the only white finish in this depth range.

Deeper worktop range611–900 mm

Eight finishes, including White K1040 UN and White P0464.

Extra-deep island range901–1200 mm

Eight finishes for deeper worktops and appropriately sized kitchen island lifts.

Choose the depth range before the finish

From a conventional-depth worktop to a 1200 mm-deep island surface

The 450–610 mm range offers seven finishes, with White K1040 UN as its only white option. Both the 611–900 mm and 901–1200 mm ranges offer all eight décors, including the separate White P0464 finish.

All three ranges are 30 mm thick and made to the confirmed project dimensions. The required depth should be coordinated with the lifting system, cabinetry, wall clearances, services and intended sink or appliance layout before manufacture is approved.

White K1040 UNPlain neutral white. Available in all three depth ranges.

White P0464An additional white option for the 611–900 mm and 901–1200 mm ranges.

Black BrazilNear-black with subtle mineral-effect mottling. Available in all three depth ranges.

Grey DustGrey with darker granular flecks. Available in all three depth ranges.

Virrvarr AntracitAnthracite with fine intersecting lines. Available in all three depth ranges.

Svartvit GranitDark granite effect with white and grey flecks. Available in all three depth ranges.

Lava DustLight background with fine grey speckling. Available in all three depth ranges.

Block Board BeechWarm beech-effect block pattern. Available in all three depth ranges.

Confirm the final depth, finish and edge specification before manufacture. White P0464 is available only in the 611–900 mm and 901–1200 mm ranges.

Height-adjustable worktops

Coordinate the worktop with the selected Granberg lift. Appropriately sized worktops are compatible with Centerlift 9600H and 6490H island systems and can be purchased with the lift as a set on the relevant Centerlift product page.

Sink and tap integration

Sink choice affects usable worktop depth, knee space, drainage and tap position. Treat the sink zone as part of the same specification rather than a later cut-out decision.

Fixed-height accessible kitchens

A made-to-measure surface can also be useful where the worktop itself does not move but dimensions still need to suit seated reach, specialist sinks or an adapted room layout.

Confirm the lift or support

Identify the exact Granberg frame or fixed support arrangement the worktop will sit on.

Confirm the dimensions

Set the required overall length and choose the appropriate current depth band: 450–610 mm, 611–900 mm or 901–1200 mm.

Coordinate the working zone

Check sinks, hobs, taps, services, walls and adjacent furniture before fabrication details are approved.

Approve the finish

Choose the worktop finish and confirm the final specification before bespoke manufacture begins.

These are bespoke made-to-order products. Once manufacture has commenced, cancellation, return or exchange is normally not possible unless the product is faulty or has not been made to the agreed specification.

Made by Granberg

Accessible kitchen engineering from Sweden

Granberg designs worktop lifting systems, sinks, storage, controls and accessories as parts of complete accessible kitchen environments. The made-to-measure laminate worktops allow the visible kitchen surface to be coordinated with that specialist engineering.

Explore Granberg →

Worktop specification support

Have the kitchen dimensions, but not the final worktop specification?

Send us the room or kitchen plan, the Granberg lifting system if one is being used, the preferred finish and the required sink or appliance arrangement. We can help turn the layout into a worktop specification ready for quotation.

Discuss your worktop →Return to laminate worktops ↑