Inta Acura Care Concealed Thermostatic Sequential Shower Valve – Top or Bottom Outlet

The Inta Acura Care 79020CP Concealed Thermostatic Sequential Shower Valve combines accessible operation with thermostatic temperature control and a contemporary, discreet appearance. Designed for accessible bathrooms, care environments and commercial showering facilities, the valve features an extended lever handle to assist users with limited dexterity.

Its sequential thermostatic control allows water flow and temperature to be operated through a single handle. Integrated anti-scald cold-water fail-safe technology is designed to shut off the mixed water supply in the event of a supply failure, subject to correct installation and commissioning.

The concealed valve features a polished stainless steel rectangular cover plate, with the operating mechanism installed within the wall. The shower outlet can be configured at the top or bottom of the valve body, providing flexibility when planning the shower installation.

Key Features and Benefits:

• Concealed thermostatic sequential shower valve with single-lever operation
• Extended lever handle to assist users with limited dexterity
• Inclusive design with a contemporary, non-clinical appearance
• Thermostatic control for consistent mixed water temperature
• Anti-scald cold-water fail-safe technology
• Factory pre-set temperature of 41°C with maximum temperature stop
• Configurable top or bottom shower outlet
• Polished stainless steel rectangular cover plate
• Rotatable inlet connections to suit the direction of the supply pipework
• Integral isolation valves for servicing
• WRAS approved
• TMV3 approved for high-pressure shower applications (HP-S)

Technical Specifications:

• Manufacturer: Inta
• Range: Acura Care
• Product code: 79020CP
• Product type: Concealed thermostatic sequential shower valve
• Control: Extended single lever
• Outlet configuration: Top or bottom outlet
• Maximum static inlet pressure: 10 bar
• Minimum dynamic inlet pressure: 0.2 bar
• Maximum inlet water temperature: 85°C
• Factory pre-set mixed water temperature: 41°C with maximum temperature stop
• Temperature stability: ±2°C
• Maximum inlet pressure ratio: 5:1
• Minimum hot inlet to mixed outlet temperature differential for fail-safe operation: 10°C
• Inlet connections: 15 mm compression
• Outlet connection: 15 mm compression
• Inlet centres: 150 ±5 mm
• Rectangular cover plate width: 206 mm
• Rectangular cover plate height: 112 mm
• Control body diameter: 50 mm
• Finish: Chrome control with polished stainless steel cover plate

Approvals and Certification:

• WRAS approved
• TMV3 approved for high-pressure shower applications (HP-S)

Installation and Maintenance:

The 79020CP is designed for concealed installation in a suitable solid or stud wall. The hot and cold water supplies must be connected in accordance with the manufacturer's instructions, with the hot supply on the left and cold supply on the right when viewed from the front.

The unused outlet must be sealed using the supplied outlet plug. The valve must be installed, commissioned and maintained in accordance with Inta's installation and maintenance instructions. The mixed water temperature must be checked and adjusted to suit the site conditions and intended application.