Inta Enzo Concealed Dual Outlet Thermostatic Shower with Overhead Soaker and Handset – Chrome
The Inta Enzo Concealed Dual Outlet Thermostatic Shower combines contemporary chrome styling with the flexibility of an overhead shower and a separate handset. Supplied with a 200 mm overhead soaker, 350 mm wall-mounted shower arm, multi-function handset and flexible shower hose, this complete shower system is designed for modern bathrooms and shower enclosures.
The concealed thermostatic shower valve incorporates anti-scald technology with fail-safe protection on both the hot and cold water supplies. The temperature control is factory pre-set to 38°C with a maximum temperature stop and manual override, providing controlled showering when correctly installed and commissioned.
The upper control operates the water flow and selects between the overhead soaker and handheld rinse station, while the lower control adjusts the water temperature. The handheld rinse station features a multi-function handset with eco air reduced-flow technology, a double cross-linked anti-twist hose and a compact combined wall outlet and handset holder.
Key Features and Benefits:
- Concealed dual outlet thermostatic shower with chrome finish
- 200 mm diameter overhead soaker for a generous showering area
- 350 mm wall-mounted overhead shower arm
- Separate handheld rinse station for flexible showering
- Multi-function handset with eco air reduced-flow technology
- Anti-scald thermostatic technology with hot and cold supply fail-safe protection
- Factory pre-set 38°C temperature stop with manual override
- Separate temperature and flow/diverter controls
- Double cross-linked anti-twist shower hose
- Compact wall outlet incorporating a handset holder
- 220 mm diameter circular concealing plate
- Integral check valves and strainers
Technical Specifications:
- Manufacturer: Inta
- Range: Enzo
- Product code: IX600014CP
- Product type: Concealed dual outlet thermostatic shower
- Finish: Chrome
- Number of outlets: 2
- Overhead soaker diameter: 200 mm
- Shower arm projection: 350 mm
- Concealing plate diameter: 220 mm
- Concealed valve installation depth: 58–78 mm from finished wall
- Maximum static inlet pressure: 5 bar
- Minimum dynamic inlet pressure: 0.5 bar
- Maximum inlet temperature: 65°C
- Factory pre-set temperature: 38°C with maximum temperature stop
- Temperature stability: ±2°C
- Maximum unbalanced pressure ratio: 5:1
- Inlet connections: 15 mm with fast-fix connections
- Outlet connections: G1/2 BSP
- Minimum hot inlet to mixed outlet temperature differential for cold water fail-safe operation: 15°C
Installation and Maintenance:
The shower valve is designed for concealed installation in a solid or stud wall. It is suitable for a range of plumbing systems, including gravity-fed, pumped, unvented and modulating combination boiler systems, provided the manufacturer's minimum operating requirements are met. It is not suitable for non-modulating combination boilers.
The shower must be installed and commissioned in accordance with the manufacturer's instructions. The outlet temperature must be checked and calibrated to suit site conditions. Accessible isolation valves must be provided for the hot and cold water supplies to allow future servicing.
Product Documentation:
Refer to the Inta technical datasheet and installation and maintenance instructions for full dimensions, operating conditions, commissioning procedures and servicing information.
| Manufacturer | Inta |
|---|---|
| Shower Type | Direct Fed (Mixer) |
| Shower Features | Thermostatic Mixers, Shower Arm, Shower Head, Flexible Hose and Handset, Shower Head Holder, Overhead Soaker |
| Fixings | Concealed |
| Control | Manual Dial |
| Water Pressure | Low, Normal Mains |
| Technologies | Thermostatic Control, Anti-Scald |
| Stock status | Available to order |
|---|---|
| Delivery time | Please Email for a lead time |
| Returns Status | Returnable in 14 days |













