Inta Intatherm Safe Touch TMV3 Basin Mixer Tap with Detachable Spout – IT1005RS

The Inta Intatherm IT1005RS Safe Touch Thermostatic Basin Mixer Tap combines thermostatic temperature control with a detachable, self-draining spout for improved hygiene and ease of maintenance. Designed for accessible and healthcare washrooms, the tap features a long lever handle to assist users with limited dexterity.

The integrated thermostatic cartridge provides anti-scald protection, while the Safe Touch design helps reduce the risk of contact with excessively hot surfaces. The sequential lever control allows the water flow and temperature to be operated using a single handle.

The removable spout and nozzle can be cleaned and disinfected to help prevent the build-up of debris, deposits and biofilm. Supplied with copper inlet tails, the IT1005RS is suitable for single-hole basin installation.

Key Features and Benefits:

• Safe Touch thermostatic basin mixer tap with chrome finish.
• Detachable, self-draining spout for easier cleaning and disinfection.
• Long lever handle to assist users with limited dexterity.
• Sequential control of water flow and temperature.
• Integrated thermostatic cartridge with anti-scald fail-safe protection.
• Designed to stop mixed water flow in the event of hot or cold water supply failure, subject to correct installation and operating conditions.
• Factory pre-set temperature with maximum temperature stop.
• Supplied with copper inlet tails and connectors incorporating check valves and filters.
• Suitable for single-hole basin installation.
• TMV3 and WRAS approved, as stated in the manufacturer's technical datasheet.

Technical Specifications:

• Manufacturer: Inta
• Range: Intatherm Safe Touch
• Product code: IT1005RS
• Product type: Thermostatic basin mixer tap
• Finish: Chrome
• Spout: Detachable and self-draining
• Control: Long lever, thermostatic sequential operation
• Inlet connections: M10 copper tails
• Copper tail length: 350 mm
• Maximum static inlet pressure: 10 bar
• Minimum dynamic inlet pressure: 0.2 bar
• Maximum dynamic inlet pressure: 5 bar
• Maximum inlet temperature: 85°C
• Factory pre-set temperature: 43°C with maximum temperature stop, according to the technical datasheet
• Temperature stability: ±2°C
• Minimum temperature differential for fail-safe operation: 10°C
• Maximum unbalanced pressure ratio: 15:1 with flow regulator; 5:1 without flow regulator
• Overall height: 151 mm (technical datasheet)
• Tap body diameter: 50 mm

Approvals and Compliance:

• TMV3 approved for high-pressure wash-hand basin applications (HP-W).
• WRAS approved, as stated in the manufacturer's technical datasheet.
• Manufacturer states DDA compliance.

Installation and Maintenance:

The tap must be installed and commissioned in accordance with the manufacturer's instructions. The detachable spout and nozzle should be periodically cleaned and disinfected to maintain hygiene and performance. The thermostatic temperature setting must be checked and adjusted to suit site conditions.