Inta Intatherm Safe Touch TMV3 Thermostatic Basin Mixer Tap – 140mm Lever, Flexible Tails, 4 L/min

The Inta Intatherm IT1005FT4 Safe Touch TMV3 Thermostatic Basin Mixer Tap combines thermostatic temperature control with a water-saving 4 litres per minute flow regulator. Designed for use in accessible and commercial washrooms, the mixer features a long lever handle to assist users with limited hand strength or dexterity.

Incorporating Inta's Safe Touch design and thermostatic sequential control, the tap features anti-scald failsafe technology to help protect users against sudden changes in water temperature. The mixer is factory preset to 43°C with a maximum temperature stop and provides temperature stability of ±2°C under the manufacturer's specified operating conditions.

The IT1005FT4 is supplied with 400 mm flexible connection tails and features a self-draining spout. WRAS and TMV3 approved, it offers the same principal features as the IT1005FT model, with a reduced flow rate of 4 L/min rather than 7 L/min.

Key Features and Benefits:

• 4 L/min flow regulator to help reduce water consumption
• Thermostatic sequential control for temperature regulation
• Safe Touch design
• Anti-scald failsafe technology
• Long lever handle to assist users with limited dexterity
• Factory preset temperature of 43°C with maximum temperature stop
• Temperature stability of ±2°C
• Self-draining spout
• Supplied with 400 mm flexible connection tails
• WRAS and TMV3 approved
• Chrome finish

Technical Specifications:

• Manufacturer: Inta
• Range: Intatherm Safe Touch
• Product code: IT1005FT4
• Product type: Thermostatic basin mixer tap
• Control: Thermostatic sequential lever
• Flow rate: 4 litres per minute
• Connection tails: 400 mm flexible
• Inlet connections: M10 / 1/2 inch tails
• Maximum static inlet pressure: 10 bar
• Minimum dynamic inlet pressure: 0.2 bar
• Maximum inlet temperature: 85°C
• Factory preset temperature: 43°C with maximum temperature stop
• Temperature stability: ±2°C
• Minimum temperature differential for hot or cold failsafe: 10°C
• Compatible installation systems: Unvented, pressurised, gravity and combination
• Overall height: 151 mm
• Spout projection: 100 mm
• Lever reach: 138 mm
• Tap body diameter: 50 mm
• Finish: Chrome

Approvals:

The Inta Intatherm IT1005FT4 thermostatic basin mixer tap is WRAS and TMV3 approved, as stated in the manufacturer's technical datasheet.

Compatibility and Installation:

Suitable for unvented, pressurised, gravity and combination water systems, subject to the manufacturer's specified operating requirements. The IT1005FT4 version is supplied with flexible tails and a 4 L/min flow regulator. Copper-tail and 7 L/min variants are available under separate manufacturer product codes.