Choose how Granberg Verti, Diago and InDiago wall cabinet lifts are controlled, finished and equipped, from fixed buttons and handheld remotes to lighting, Diago screening and custom safety components.
Use alongside Magento's normal filters to narrow the mixed accessory range.
The lift is only part of the wall cabinet system
Verti, Diago and InDiago solve different wall-storage problems, but each still needs an operating method that works comfortably for the person using the kitchen.
A large fixed button creates a permanent control position. Mini buttons keep the fascia more discreet. Wireless controls can simplify cable routing, while a handheld remote allows the operating position to move with the user.
This category also includes components that have nothing to do with the up/down button itself: lighting for moving cabinets, frames for organising controls, and Diago-specific screening and safety parts.
Choose the interaction before the appearance
Different formats suit different users and kitchen layouts. The most discreet button is not automatically the easiest to use, while the largest control is not necessarily the most convenient place to reach.
The 82 × 82mm control format gives the user a clear, predictable operating point that can be recessed into suitable kitchen furniture or worktop fascia.
Separate up and down buttons create a much smaller visual footprint and can integrate neatly into a modern fascia.
Radio controls avoid the need for a control cable between the operating button and compatible lift, helping simplify some installations.
The control is not tied to one fixed position. Single-channel handsets operate one compatible lift, while multi-channel versions can control several Granberg systems.
Larger integrated operating surface. ALU-design and black control products use this general format.
Two discreet recessed controls rather than one larger faceplate.
Portable operating position for one or several compatible lifting systems.
A small specification decision with a big usability effect
The control should be reachable from the position in which the cabinet will be used. That may be at the front edge of an adjustable worktop, on neighbouring furniture or on a handheld remote.
Product-code compatibility matters
Some black controls and handheld remotes span several Granberg lifting systems, while ALU-design controls, mini-button sets, lighting and finishing components can have model-specific product codes.
Verti lowers the shelving inside the wall cabinet vertically. Its accessory range includes shared black controls and remotes alongside dedicated Verti / Diago control products and moving-cabinet lighting.
Diago moves the entire cabinet arrangement forwards and down. It therefore has the broadest accessory family here, including controls, moving lighting, roller screens and custom safety-panel components.
InDiago leaves the cabinet fixed while its internal shelf assembly travels forwards and down. Shared black controls and remotes sit alongside dedicated InDiago ALU and mini-button products.
Frames & switches
The category includes two- and three-position compartment frames for grouping compatible ALU-design controls rather than installing each component as a visually unrelated switch.
A black double frame provides the corresponding format for Granberg's newer black control language, while the ALU-design extension frame can be used where a compatible button needs a surface-mounted rather than recessed presentation.
The separate white power switch is also included in the range, so the finished operating area can be planned alongside the lift controls rather than afterwards.
Concept only. The actual frame, switches and controls must be selected according to the compatible Granberg systems and electrical installation.
Illuminate the work surface below
All three products use pairs of compact 24V LED spotlights, but the cable arrangement changes when the lighting itself travels with a moving Verti or Diago system.
A pair of spotlights intended beneath a conventional fixed wall cabinet, rather than on a cabinet or safety panel that changes position.
Designed for the moving Verti assembly, with a flexible spiral cable that accommodates the cabinet lift's vertical travel.
Designed to travel with the Diago cabinet arrangement as the complete cupboard moves forwards and down.
Diago 504 finishing
Diago is unusual because the wall cabinet itself travels forwards and down. That leaves the lifting mechanism behind the cabinet more exposed during movement.
Granberg's grey roller screen extends automatically as the Diago lowers, creating a cleaner visual finish behind the moving cabinet without preventing the lift from completing its normal travel.
50431-0000 custom safety pack
The Diago safety pack supplies four micro-switches, cables and the information needed to produce a custom safety trip panel in a board material that suits the finished kitchen.
When the underside panel is pressed or meets an obstruction on the worktop, the micro-switches activate and the Diago rises until the switches are released.
The board itself is not included, so its dimensions need to remain within Granberg's specified range.
Start with the lifting system
Installed inside the cabinet, Verti brings the internal shelving vertically down towards the worktop while the cabinet itself remains fixed.
Explore Verti 840 →Moves one or more complete wall cabinets forwards and down towards the front of the worktop.
Explore Diago 504 →Keeps the outer cabinet fixed while the internal shelf assembly travels forwards and down towards the user.
Explore InDiago 510 →
Made by Granberg
Granberg designs the lift, controls, safety protection, lighting and finishing components as parts of a coordinated accessible kitchen system. Selecting accessories around the exact lift model helps preserve both usability and the intended movement of the finished installation.
Explore Granberg →Wall cabinet lift specification support
Send us the Granberg wall cabinet lift model, how the user would prefer to operate it and whether lighting, radio control or Diago finishing components are required. We can help identify the appropriate product codes and check compatibility before the kitchen is finalised.
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
7-10 working days
In stock
Next working day if ordered by 2pm
In stock
Next working day if ordered by 2pm
Available to order
7-10 working days
In stock
Next working day if ordered by 2pm
Available to order
7-10 working days
Available to order
7-10 working days
Available to order
2-3 weeks
Available to order
2-3 weeks
Available to order
2-3 weeks
In stock
Next working day if ordered by 2pm
Available to order
7-10 working days
In stock
Next working day if ordered by 2pm
We accept the following payment methods
Independent 4 Life Limited
Address: Bellamy House, Winton Road, Petersfield, Hampshire, GU32 3HA
Freephone: 0800 500 3001 | Tel: 023 92755992
Email: info@independent4life.co.uk
Showroom / Office Hours: Monday to Friday 9am - 5pm
Showroom by appointment: evenings and Saturdays
Registered Company Number: 06294300 | VAT Number: 942 4477 11
