Accessible living specialists
Trading online since 2010
A compact electric corner worktop lift for conventional right-angled kitchen layouts, with a 90° front edge, 90° wall corner and optional Plusmodules for extending the moving worktop along either side.
Start with the compact 595 × 595mm corner module. Add Plusmodules when the adjustable worktop needs to continue along either side of the corner.
Showing the 4 main corner worktop lifts below.
The square-corner Baselift
Baselift Corner 6303 / 6313 is Granberg's compact right-angle corner system. Both the wall behind the worktop and its visible front edge meet at 90°, making this the natural Baselift Corner for a conventional square kitchen layout.
The central lifting module occupies only 595 × 595mm. From there, Plusmodules can extend the moving worktop along the left, right or both sides, allowing the finished adjustable surface to be sized around the wider kitchen.
This makes the 6303 / 6313 particularly useful where the goal is to retain familiar L-shaped kitchen geometry while giving the entire working corner electric height adjustment.
Choosing the correct Baselift Corner
The three Baselift Corner families share the same basic idea of a powered L-shaped worktop, but each follows a different combination of front-edge and wall geometry.
A diagonal front working edge around a conventional right-angled wall corner.
View 6301 / 6311 →Designed around an angled room, with 45° geometry at both the visible front and the wall.
View 6302 / 6312 →A conventional square corner, with perpendicular worktop runs and a compact 595 × 595mm centre module.
Choose your 6303 / 6313 model ↓
Choosing the main corner lift
All four versions use the same 595 × 595mm square-corner geometry. The model code changes according to how the lift is supported and how much depth is required within the worktop's front compartment.
Choose the structural support method according to the wall construction and the wider kitchen installation.
Choose the front-compartment depth around the functions that will form part of the moving worktop.
Two front-compartment depths
The HA version uses a 103mm-high compartment frame. Granberg specifies this version for installations that can incorporate functions such as drawers, compatible sinks, cooking hobs and larger control arrangements.
The LA version reduces the front height to 40mm. It is intended where a slimmer appearance is wanted and the adjustable surface is principally carrying the worktop and a compatible cooking hob.
Whichever front is selected for the main corner, the adjoining Plusmodules should use the corresponding HA or LA format.
Choosing how the corner is supported
The working geometry does not change. The distinction is structural: the 6303 is fixed to suitable walls, while the 6313 uses floor-mounted lifting columns.
Build outward from the 595mm corner
The 6303 / 6313 creates the compact moving corner. A Plusmodule extends that powered worktop along the left or right wall, so the adjustable area can grow around the dimensions of the kitchen.
Each side can be extended by up to 2400mm. With the longest Plusmodule on both sides, the complete corner system can reach approximately 2995 × 2995mm overall.
The extension must match the main corner's mounting method and HA or LA front. Left and right versions are then selected separately.
Plusmodule model decoder
The product codes identify whether the extension is wall- or floor-mounted and whether it fits the left or right side. HA and LA versions then match the selected front configuration.
Left-hand extension for the wall-mounted Baselift 6303.
Right-hand extension for the wall-mounted Baselift 6303.
Left-hand extension for the floor-mounted Baselift 6313.
Right-hand extension for the floor-mounted Baselift 6313.
Core performance
The main corner and correctly paired Plusmodules operate together so the connected working surface can be repositioned as one height-adjustable kitchen area.
Stepless electric travel.
Excluding worktop.
Powered vertical movement.
Maximum distributed load.
Adjustable from wall.
Recommended range.
Familiar geometry, specialist engineering
The 90° / 90° layout makes the 6303 / 6313 relatively easy to understand within a kitchen plan, but the finished installation still needs to account for everything that moves with the worktop.
Sinks, hobs, drawers, control positions, plumbing, electrics and adjoining furniture should therefore be resolved before the final worktops and cabinetry are manufactured.
Before ordering
The compact 595mm centre makes the 6303 / 6313 especially dependent on the Plusmodules and surrounding kitchen plan. Establish the complete L-shaped worktop before choosing individual extension sizes.
Use this family where both the wall corner and visible worktop corner are square.
Decide whether the installation should be supported from suitable walls or from the floor.
Match the compartment depth to the functions planned within the moving worktop.
Select a left-hand Plusmodule width from 400–2400mm where an extension is required.
The right extension is selected independently, allowing unequal L-shaped layouts where appropriate.
Check sinks, hobs, electrics, plumbing and adjacent furniture throughout the complete movement range.
Send us the room dimensions, intended worktop lengths, mounting conditions and positions of sinks, hobs and drawers. We can help identify the appropriate main lift and Plusmodule configuration.
Continue exploring
Understand how height-adjustable kitchen worktops operate and how layout, frame depth and integrated components affect the finished kitchen.
Read the worktop-lift guide →Explore powered height adjustment, independent operation and the practical considerations involved in integrating an electric lifting system.
Read the electric worktop guide →Compare the three Baselift Corner geometries with straight, electric and manually adjustable kitchen worktop systems.
Compare worktop lifts →
Made by Granberg
Baselift Corner forms part of Granberg's wider accessible kitchen range, alongside straight height-adjustable worktops, kitchen islands, wall-cabinet lifts, shallow sinks and specialist storage and control systems.
Explore Granberg →Corner worktop design & specification support
Send us the room dimensions, worktop lengths, mounting conditions and any proposed sink, hob or drawer positions. We can help identify the correct 6303 or 6313 configuration and match the required Plusmodules before the surrounding kitchen is manufactured.
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
2-3 weeks
