AKW Mullen Surface or Level Access CNR SHWR Tray - Choice of Size & Waste
Corner AKW Mullen shower tray available in range of sizes all trays which all have + 50mm flange. Quick and easy installation, the tray is 27mm thick for recessing in screed or timber floors for level access or can be surface mounted. Slip resistant textured surface, a strong and stable tray manufactured from compressed GRP. Vinyl safety flooring can be clamped to the side of the tray for a leak free floor. Wall boards, pipe ducting and floor tiles can be used with adapter kits. Compatible with AKW Standard, Sliding, Glass and Silverdale shower screens. Max. load 190kg. 90mm waste hole with a choice of GW90 Gravity or PW90 Pumped wastes with 15 or 22mm outlets.
The AKW Mullen corner shower tray is 27mm thick tray, range of sizes and handing. Offset corner 90mm waste hole for quick and easy installation to avoid joists. Choice of GW90 Gravity or the PW90 Pumped wastes with either 15 or 22mm outlets.
Suitable for timber and screed floors, can be surface mounted or recessed for level access. The trays slip resistant textured surface decreases the risks of accidents when using the shower.
Vinyl safety flooring can be clamped to the side of the tray for a leak free joint. Non-slip floor tiles can be used which also requires the Floor Tiling Adaptor kit (Product code: 26259).
The tray is compatible with AKW Standard, Sliding, Glass and Silverdale shower screens, check the image gallery for the compatibility chart.
Key benefits:
- Corner shower tray for level access where the client needs a defined showering area
- Unique vinyl safety flooring integrated clamping strip allows for quick and watertight installations
- Flooring can be fitted after the tray and screen have been installed avoiding unnecessary site visits
- Built in tiling upstands on 2 sides complete the all-round integrity of the water seals
- Suitable for point loading from seats
- Weight limited 190kg / 30 stone
- No under tray foaming is needed
- Corner waste position helps avoid joists
- Ribbed underside eliminating slippage or float during installation
- Watertight seals with the Intergrip® strip for joining vinyl sheet flooring to the tray edge
- Quick draining, with a 25mm fall inside the tray
- Unrivalled strength and stability, using compressed GRP
- Pre-formed fixing holes ensure quick and easy installation
- Slip resistant textured surface
- Floor tiling, wallboard adaptor, and pipe duct kits are available separately to aid any installation
Waste options:
- - Flow rate: approx. 31 litres per minute
- - Installation depth required below tray (mm): 90
- - Flow rate: approx. 31 litres per minute
- - Installation depth required below tray (mm): 60
- - Flow rate: approx. 14 litres per minute
- - Installation depth required below tray (mm): 60
- - Non return valve ensures the trap always retains water
- - Flow rate: 27 l/min with 15mm head and 1m of pipe
- - Installation depth required below tray (mm): 48
- - Outlet pipe (mm): 15 / 22
- - Installation depth required below tray (mm): 36
AKW: 25120 - GW90 90mm Dia. Gravity Waste (50mm Water Trap)
AKW: 25434 - GW90 Metal Topped 90mm Dia. Waste
AKW: 25404 - Low Depth GW90 Waste (50mm Water Trap)
AKW: 25492-UK - DW90 Low Depth Dry Shower Waste
AKW: 25105 / 25406 - PW90 Pumped Waste
Technical details:
- 27mm tray height
- Range of tray sizes, select as required below
- All trays width and depth + 50mm flange
- Screed floors require a 27mm recess for level access
- Can be surface mounted on screed floors, ramps are available for installation above or below vinyl flooring
- Timber floors require plywood (not included) to increase the floor up to the tray height, for complete level access
- Corner 90mm waste outlet hole
- Choice of gravity or pumped wastes
- Unrivalled strength and stability, manufactured from compressed GRP
Warranty:
- Lifetime manufacturer warranty
Manufacturer product codes:
- Tray only code: 26100, 26101L, 26101R, 26072L, 26072R, 26102L, 26102R, 26107L, 26107R, 26104L, 26104R
- Tray with Gravity Waste code: 26074, 26106L, 26106R, 26073L, 26073R, 26109L, 26109R, 26111L, 26111R, 26110L, 26110R
| Manufacturer | AKW / Contour |
|---|---|
| Model | AKW - Mullen |
| Tray Size (mm) | 1000x1000, 1200x700 - LH, 1200x700 - RH, 1200x820 - LH, 1200x820 - RH, 1300x700 - LH, 1300x700 - RH, 1300x820 - LH, 1300x820 - RH, 1420x700 - LH, 1420x700 - RH |
| Handing | Left Hand, Right Hand, Unhanded |
| Entry Configuration | Front Entry (Alcove), Corner Entry |
| Step-in Height (mm) | Level Access - 0, Low Level Step-in - 27 |
| Thickness of Tray (mm) | 27 |
| Waste Compatibility | Gravity Waste, Pumped Waste |
| Tray Edge for Floor Finish | Yes - Vinyl or Tiles |
| Ramp or Step Available | Ramp |
| Stock status | In stock |
|---|---|
| Delivery time | Next working day if ordered by 1.30pm |
| Returns Status | Returnable in 14 days |
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
Product Code:
MULLEN
In stock (Info)
Next working day if ordered by 1.30pm VAT Exemption is available on this product - deducted at Checkout (Info)
Corner AKW Mullen shower tray available in range of sizes all trays which all have + 50mm flange. Quick and easy installation, the tray is 27mm thick for recessing in screed or timber floors for level access or can be surface mounted. Slip resistant textured surface, a strong and stable tray manufactured from compressed GRP. Vinyl safety flooring can be clamped to the side of the tray for a leak free floor. Wall boards, pipe ducting and floor tiles can be used with adapter kits. Compatible with AKW Standard, Sliding, Glass and Silverdale shower screens. Max. load 190kg. 90mm waste hole with a choice of GW90 Gravity or PW90 Pumped wastes with 15 or 22mm outlets.
In stock
As low as
£382.33
£318.61
