Granberg Wall Mounted Motorised Mini Kitchen Module 6300-ESFS - Left, Choice of Widths 990-1190mm

Availability Made to order (Info)
Expected delivery 3-4 weeks
VAT Exemption is available on this product - deducted at Checkout (Info)
Product Code: 6300-ESFS-L
Complete wall mounted electric Mini kitchen Module 6300-ESFS, by Granberg, one piece stainless steel smooth worktop/drying area, right hand 2 zone hob cut-out and one left hand shallow depth kitchen sink bowl, lever tap with swivel spout. White facia front with pre-fitted ALU-design up/down button and key lock. Brushed aluminium rear edge trim. Easy to remove matt white cover panels hide the legs and services below the worktop. Height adjustable range of 300mm. Maximum load 100kg.
READ MORE

* Required Fields

 

You may also be interested in...

Granberg Baselift 6300HA, Wall, 103mm Front, ADJ Worktop Lift - 590-1000mm

Granberg Baselift 6300HA, Wall, 103mm Front, ADJ Worktop Lift - 590-1000mm

Product Code: 6300HA-059100

Ex. VAT: £2,205.90 Inc. VAT: £2,647.08
Granberg Baselift 6300HA, Wall, 103mm Front, ADJ Worktop Lift - 1001-1800mm

Granberg Baselift 6300HA, Wall, 103mm Front, ADJ Worktop Lift - 1001-1800mm

Product Code: 6300HA-109180

Ex. VAT: £2,557.80 Inc. VAT: £3,069.36

Product Description

Details

Granberg’s Mini kitchen Module 6300-ESFSL, a wall mounted electric worktop lift with a one piece stainless steel worktop with a left hand single bowl sink, tap and 2 zone hob cut-out to the right. With 300mm of step less height adjustment the worktop lift features a smooth stainless worktop that is ideal for preparing food or as drying area. FM Mattsson kitchen monobloc mixer tap with a 190mm easy to reach lever and swivel spout.

The underside of the ESFS stainless steel worktop/drying area is supported by a fully-glued MDF board.

The ALU-design control button and safety lock will be pre-fitted in the front facia, the rear cover panels are easy to fit and hide the legs and services.

Compatible with any kitchen manufacturer this complete electric worktop lifting system is quick and easy to install with "Plug and Play" electronics and motor systems.

The modules are manufactured 10mm shorter in width, to allow for a 5mm clearance gap at both ends for safe movement, ideal for the direct replacement of 1000 and 1200mm width cabinets. The module has a reduced depth of 15mm to accommodate splashbacks and wall tiles.

The anti-pinch safety strip is located under the front edge of the worktop front facia. If anything touches the strip, the lift unit stops. Side safety strips are available as an optional extra.

This 6300-ESFSL Mini Kitchen Module is also available with the hob located on the left-hand side with the sink on the right-hand side. Electric floor standing systems or Manual hand cranked wall mounted variations are also available.

Key benefits:

  • Left hand motorised mini kitchen module with 300mm of motorised height adjustment, 730-1030mm above the floor
  • The wall mounted legs are concealed by 2x matt white sliding cover panels with 2x dark grey coloured steel end plates
  • Tilt able worktop plane for adjustment
  • Full extension drawers can be added (except; below the hob) as a factory fitted option - (Contact us if required)
  • Range of widths 990 and 1190mm to suit standard kitchen base unit spaces: 1000 and 1200mm
  • The modules are 10mm shorter in width to allow for a 5mm gap both sides of the unit for the up/down movement
  • Adjustable depth 576-606mm including the Alu. front to suit adjoining cabinets and worktops
  • 100mm free space below the foot of each leg for services
  • Quick solution, top frame supplied pre-assembled for fast site installation
  • Simple 'plug and play' setup for easy motor configuration
  • Granberg corded control button ALU-design 82 x 82 x 17mm, with large easy to use up/down buttons
  • White Powder Coated RAL 9003 aluminium facia front with plastic end caps
  • The control button and key lock are factory fitted in the facia front in your specified position
  • ESFS stainless steel worktop with one left hand 120mm deep shallow bowl sink, overflow and flexible waste kit
  • FM Mattsson kitchen monobloc mixer tap with 190mm easy reach lever and swivel spout that can be adjusted to 60°, 85°, 110°, 360° or fixed
  • Customizable cut-out, to suit your 2 - zone electric cooking hob (do not fit gas hobs)
  • All components available separately

Integrated safety system:

  • Anti-pinch safety stop strip located below the front edge of the worktop frame
  • This strip prevents the lift from descending if contact is made
  • Additional side safety stop strips can be added, required if the worktop is situated adjacent to other furniture* or objects like a waste bin
  • *When correctly installed the frames underside from the floor should be 597mm at its lowest and 897mm at the highest point. Entrapment should be prevented with adjoining surfaces

Mini Kitchen Module 6300-ESFS Left includes:

  • Wall mounted motorised 6300 worktop lift with 2x leg motors
  • Control button, ALU-design
  • Safety lock with keys
  • Safety stop system under the front edge of the worktop frame
  • 2x 12mm matt white melamine cover panels hide service installations under the worktop
  • White aluminium front facia
  • Smooth stainless steel worktop/drying area with raised perimeter
  • Brushed aluminium rear edge trim
  • ESFS worktop with one left hand 120mm shallow depth sink bowl, shallow trap, strainer waste and a flexible drain hose
  • FM Mattsson Mixer tap with long lever and flexible water hoses
  • Right hand customizable cut-out, to suit your electric cooking hob

Recommended accessories:

  • Full extension, push-to-open integrated drawers
  • Cutlery tray
  • Power Switch
  • 2 Button multi-compartment frame
  • Kitchen sink heat insulation pad
  • Mini cabinet on wheels

Technical details:

  • Height adjustment: Motor-driven, steplessly adjustable by 300mm (730 - 1030mm)
  • Speed: 30mm / sec.
  • Safety: Security strip, contact with the strip stops the lift
  • Electrical connection: Mains plug for 230 V, max 5.0 A
  • Max. distributed load / Lifting force: 100kg (220lbs)
  • IP-class: IP 20
  • Frame depth: 576 - 606mm from the wall (Incl. front)
  • Tilt able worktop plane for adjustment
  • Front height: 103mm
  • All fittings for assembly supplied wall fixings are not included
  • Space to adjoining wall / cabinet side (mm): 5
  • Space to wall (for tiles): 15mm
  • Tiling: From 700 mm above the floor (alternatively tile down to floor level)
  • Worktop frame Material: Aluminium frame
  • ESFS sink: Smooth 1mm stainless steel sheet
  • Bowl size: 293mm width x 400mm depth x 120mm deep
  • Shallow trap, strainer waste and a flexible drain hose

2-zone Hob cut-out (The hob shown in images is not included):

  • Inset by 100mm from the Right hand end of worktop
  • Pre-cut to your specified dimensions
  • Inset from the front by 50mm
  • Inset from the side by 100mm
  • Specify your Width x Depth (mm), as per your hob manufactures installation instructions

Stainless steel worktop:

  • Hygienic and wear-resistant drying area
  • Smooth 1mm stainless steel sheet with a raised edge perimeter
  • The underside of the stainless steel worktop is supported by a fully-glued MDF board
  • Brushed aluminium rear edge strip
  • Overall thickness of worktop: 30mm

Warranty:

  • 2 year manufacturer warranty

Please note:

  • Due to the custom nature of this product, it is made-to-order and is therefore non-returnable
  • Note: The Tap hole is not pre-drilled

Technical Information

Additional Information

Manufacturer Granberg
VAT Exemption Available Yes
Brand - Model Granberg Mini Kitchen Module
Lifting Force (kg) 100
Method of Operation Electric - Push Button
Height Adjustment (mm) 300
Mounting Wall Mounted

Installation and Help Guides

Product Downloads

Simply copy this text directly into your tender document...

Granberg Wall Mounted Motorised Mini Kitchen Module 6300-ESFS - Left, Choice of Widths 990-1190mm

Product code: 6300-ESFS-L

Complete wall mounted electric Mini kitchen Module 6300-ESFS, by Granberg, one piece stainless steel smooth worktop/drying area, right hand 2 zone hob cut-out and one left hand shallow depth kitchen sink bowl, lever tap with swivel spout. White facia front with pre-fitted ALU-design up/down button and key lock. Brushed aluminium rear edge trim. Easy to remove matt white cover panels hide the legs and services below the worktop. Height adjustable range of 300mm. Maximum load 100kg.

Website: www.independent4life.co.uk
Email: [email protected]
Tel: 02392755992

We accept the following payment methods

PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque