McAlpine Wht Valve Gully 1 1/2" Solvent Outlet - Vinyl Flooring
McAlpine VSG1 non return valve gully, a 75mm depth gully for floor former installations where depth is restricted. Includes clamping ring for fitting flexible sheet flooring in wet rooms. The valve substitutes a water seal trap and opens and closes due to the weight of the water discharge. Includes Flexcon6 fitting. low rates of up to 30 l/min.
The McAlpine VSG1 Non-Return Valve Gully is ideal for floor former installations where depth is restricted.
The valve is a substitute for a regulatory water seal trap; the weight of the water discharge will open and close the valve.
Key benefits:
- Suitable for concrete and suspended timber floors
- Eliminates the release of foul air due to back flow
- Flow rates of up to 30 l/min when tested under a constant 15mm head of water
- Includes clamping ring for fitting flexible sheet flooring in wet rooms
- 75mm depth, for foor former installations where depth is restricted
- 200mm overall diameter
- 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
- Manufactured in ABS to the highest quality
- ABS push fit gully cover (without securing screws)
- Includes Flexcon6 1½" multi-fit plain outlet fitting
Please note: It is advisable to seek guidance from local Building Control prior to use as there are currently no regulations to cover the use of anything other than a 50mm water seal trap.
Alternative product code:
- Former Contour Showers (Product code: 08GV01NSC)
| Manufacturer | McAlpine |
|---|---|
| Configuration | Gravity Waste |
| Compatible Tray or Former | AKW - Tuff Form, AKW - Tuff Form8, AKW / Contour - ShowerDec, Maxxus |
| Installation | Floor Formers, Concrete / Screed Floors, Timber Floors |
| Application | Floor Former, Screed Floors, Timber Floors |
| Waste Diameter (mm) | 200 |
| Waste Outlet / Depth (mm) | Horizontal |
| Flow Rate / l/min | 30 |
| Floor Finish | Vinyl Sheet Flooring |
| Grate Material / Finish | Plastic / White |
| Stock status | 4x In stock |
|---|---|
| Delivery time | Next working day if ordered by 1.30pm |
| Returns Status | Returnable in 14 days |
Select your Country and enter your Postcode to check available shipping options and calculate rates for this product
McAlpine VSG1 non return valve gully, a 75mm depth gully for floor former installations where depth is restricted. Includes clamping ring for fitting flexible sheet flooring in wet rooms. The valve substitutes a water seal trap and opens and closes due to the weight of the water discharge. Includes Flexcon6 fitting. low rates of up to 30 l/min.
In stock
£89.42
£74.52
Product Code:
VSG1WH
RRP Inc. VAT: £246.68 Save 64%
4x In stock (Info)
Next working day if ordered by 1.30pm VAT Exemption is available on this product - deducted at Checkout (Info)
